1. Please plug in one of the M2s and connect the ethernet cable to the WAN port of the device and to the LAN port of your modem.
  2. Connect to the Open Mercku network: Mercku-XXXX
  3. Go to the Mercku App and follow the instructions to set up the SSID.
  4. Once your SSID is set up, you will be able to add the remaining 2 M2s as nodes, to do so first ensure that you are connected to the Mercku Wi-Fi and go to the Mercku App or log on to mywifi.mercku.tech
  5. Click on the “+” on the right top corner of the page. 
  6. Select Start > Select M2 Standalone Wi-Fi router
  7. Click on Next > Plug in the M2 Router and wait for 1 minute until the indicator light is solid red. 
  8. Follow the instructions on the interface and wait for a minute while the server is looking for the device. 
  9. Once the device appears, select the M2-XXXX > click Next and wait for 1 minute until the “Successfully added” message appears. 
  10. Go to the homepage and you will be able to see the new device connected to the network.

Please NoteWhen you first plug-in the M2, the light will be solid red then blink red and become solid red again, wait until the light becomes STEADY RED BEFORE hitting the Reset Button.