Using the Mercku App:

  1. Open the Mercku App on your mobile device.
  2. Select the "+" sign at the top right corner > Start > Select M2 Standalone Wi-Fi Router
  3. Plug the M2 (Queen) in and wait until its indicator light is steady red (do not connect ethernet cable).
  4. Follow the instructions on the app and wait about 1 minute for the M2 (Queen) to be detected.
  5. Once the device appears, select the M2 (Queen) you would like to add > Click Next and wait 1 minute until "Successfully Added" appears on your screen.

Using the Mercku Portal:

  1. Visit http://mywifi.mercku.tech and log in using your Router Admin Password
  2. Click Add a Node > Start > Select M2 Standalone Wi-fi router > Next
  3. Plug the M2 (Queen) in and wait until its indicator light is steady red (do not connect ethernet cable).
  4. Follow the instructions on your screen and then and wait about 1 minute for the M2 (Queen) to be detected
  5. Once the device appears, select the M2 (Queen) you would like to add > Click Next and wait 1 minute until "Successfully Added" appears on your screen.